SMC空氣用數字式流量開關,PF2W740-06-27
l/min, CFM x 10-2 l/min, CFM x 10-1
 in each X, Y, Z direction for 2 hrs, whichever is smaller. (De-energized)
490 m/s2 in X, Y, Z directions 3 times each (De-energiz
Fixed SI unit [l/min or l] will be set for switch types without the unit
Illuminates up when output is ON OUT1: Green; OUT2: Red1 sec. or less
Hysteresis mode: Variable (can be set from 0),
 Window comparator mode Note 6): 3-digit fixed
12 to 24 VDC (ripple ±10% or less)
Operating: 0 to 50°C, Stored: –25 to 85°C (with no freezing and condensation)
1000 VAC for 1 min. between external terminal and case
50M Ω or more (500 VDC Mega) between external terminal and case.
10 to 500 Hz with a 1.5 mm amplitude or 98 m/s2 acceleration,
switching function. (“-M” is suffixed at the end of part number.) Accumulated flow is reset when the
power supply turns OFF.
) Flow rate display can be switched between the basic condition of 0°C,
 101.3 kPa and the standard condition (ANR) of 20°C, 101.3 kPa, and 65% RH.
 If Vcc side on sensor input connector part is short-circuited
with the 0V side, the flow monitor inside will be damaged
SMC空氣用數字式流量開關,PF2W740-06-27